Dense Scattered - Rhinestone Strips For Cheer Bows - Ready To

By A Mystery Man Writer

Description

Create Your Own Custom Cheer Bows! This design is created with Stone Color: clear Stone Size: 3mm Dimensions - 3" Ribbon Size approx. 2.75" x 14" ( per strip) Allow up to 2 weeks for large quantities to ship. We strongly recommend a heat press for all rhinestone transfers. Complex designs do take practice. The buyer i

Create Your Own Custom Cheer Bows!

This design is created with

Stone Color: clear

Stone Size: 3mm

Dimensions
- 3 Ribbon Size approx. 2.75 x 14 ( per strip)
Allow up to 2 weeks for large quantities to ship.

We strongly recommend a heat press for all rhinestone transfers. Complex designs do take practice. The buyer is responsible for all applications.

Bows are not included with the Transfer - Photos may be shown for project ideas only

To cover the length of a full bow you will need 2 strips - this listing will create 1 full coverage classic cheer bow or 2 tailless cheer bows.

All Sales Are Final - Please Contact Us Prior To Purchasing With Any Questions.
Thank you!
Not Without A Bow TM

SUGGESTED – Heat Transfer Directions

DO NOT IRON DIRECTLY ON TRANSFER DESIGN YOU MUST USE A TEFLON SHEET, PARCHMENT PAPER OR COTTON PRESSING CLOTH.

DO NOT USE STEAM – DRY IRON OR HEAT PRESS

Before attempting to apply Transfers to a fabric / product, verify labels to ensure that the item can be ironed / have heat applied.

Directions:
Begin with an ironed and dry material

Pre Heat Iron / Heat Press: Temperatures vary
Glitter or Neon: suggested is 320 degrees – Medium setting.
Gloss or Metallic: suggested is 305 degrees

If you are applying the transfer to a multi layer or thin item, it is recommended that you also place a pressing cloth between and or under the item layers to ensure that the glue from the transfer does not pass to multiple layers or your ironing surface.

Keep transfer attached to clear plastic film – This will NOT melt when ironed

Place transfer as desired

Carefully cover with a Teflon sheet or pressing cloth to ensure transfer does not move. Do not iron directly onto Transfer. WE USE AND RECOMMEND PARCHMENT PAPER

Apply iron or heat press for approximately 5-10 seconds – DO NOT MOVE IRON – Keep the iron in place over the transfer. Cool for approximately 10-20 seconds and peel away plastic film.

The above directions are a suggested method: Please keep in mind that all irons / presses vary and heat settings and pressing duration may need adjustment.

The buyer assumes responsibility for all items when applying Transfers

Not Without A Bow™

Create Your Own Custom Cheer Bows! This design is created with Stone Color: clear Stone Size: 3mm Dimensions - 3 Ribbon Size approx. 2.75 x 14 ( per strip) Allow up to 2 weeks for large quantities to ship. We strongly recommend a heat press for all rhinestone transfers. Complex designs do take practice. The buyer is responsible for all applications. Bows are not included with the Transfer - Photos may be shown for project ideas onlyTo cover the length of a full bow you will need 2 strips - this listing will create 1 full coverage classic cheer bow or 2 tailless cheer bows.All Sales Are Final - Please Contact Us Prior To Purchasing With Any Questions.Thank you!Not Without A Bow TMSUGGESTED – Heat Transfer DirectionsDO NOT IRON DIRECTLY ON TRANSFER DESIGN YOU MUST USE A TEFLON SHEET, PARCHMENT PAPER OR COTTON PRESSING CLOTH. DO NOT USE STEAM – DRY IRON OR HEAT PRESSBefore attempting to apply Transfers to a fabric / product, verify labels to ensure that the item can be ironed / have heat applied.Directions:Begin with an ironed and dry materialPre Heat Iron / Heat Press: Temperatures varyGlitter or Neon: suggested is 320 degrees – Medium setting.Gloss or Metallic: suggested is 305 degreesIf you are applying the transfer to a multi layer or thin item, it is recommended that you also place a pressing cloth between and or under the item layers to ensure that the glue from the transfer does not pass to multiple layers or your ironing surface. Keep transfer attached to clear plastic film – This will NOT melt when ironedPlace transfer as desiredCarefully cover with a Teflon sheet or pressing cloth to ensure transfer does not move. Do not iron directly onto Transfer. WE USE AND RECOMMEND PARCHMENT PAPERApply iron or heat press for approximately 5-10 seconds – DO NOT MOVE IRON – Keep the iron in place over the transfer. Cool for approximately 10-20 seconds and peel away plastic film.The above directions are a suggested method: Please keep in mind that all irons / presses vary and heat settings and pressing duration may need adjustment.The buyer assumes responsibility for all items when applying Transfers Not Without A Bow™