Absorb minimal product and apply evenly with our microfiber applicator pads. These car coating applicator pads are great for paint, plastic and rubber trim.
The [Appli-Coat] suede microfiber ceramic coating applicators were designed by professional detailers, for ease of use and application. Made from premium 80/20, lightweight (200gsm), suede microfiber, they absorb minimal product and allow for even application on paint, plastic and rubber trim.
The edges of the sealer applicator pad are sewn inside of the sponge allowing for safe application on three smooth and soft sides. Just sprinkle a few drops of your preferred coating on one of the three flat surfaces of the suede applicator cloth and apply as directed the manufacturer.
The microfiber ceramic coating applicator pads are good for one use, and should be discarded once all three sides have been used. Once the coating cures and hardens in the material, it can harden the fibers making them rough leading to potential scratching. We do not recommend laundering or cleaning the pads, because ceramic coatings are just too tough.
We suggest using rubber gloves to prevent getting the coating on your hands and fingers.
6 pack
3x1.5x1.5
200 gsm
80% Polyester and 20% Polyamide - 100% Split
Inside Sewn Seams
Made in China
The [Appli-Coat] suede microfiber ceramic coating applicators were designed by professional detailers, for ease of use and application. Made from premium 80/20, lightweight (200gsm), suede microfiber, they absorb minimal product and allow for even application on paint, plastic and rubber trim.
The edges of the sealer applicator pad are sewn inside of the sponge allowing for safe application on three smooth and soft sides. Just sprinkle a few drops of your preferred coating on one of the three flat surfaces of the suede applicator cloth and apply as directed the manufacturer.
The microfiber ceramic coating applicator pads are good for one use, and should be discarded once all three sides have been used. Once the coating cures and hardens in the material, it can harden the fibers making them rough leading to potential scratching. We do not recommend laundering or cleaning the pads, because ceramic coatings are just too tough.
We suggest using rubber gloves to prevent getting the coating on your hands and fingers.
- 6 pack
- 3x1.5x1.5
- 200 gsm
- 80% Polyester and 20% Polyamide - 100% Split
- Inside Sewn Seams
- Made in China
DI Microfiber Applicator Pad - Rectangle - Detailed Image
Vestax PMC-CX Carl Cox DJ Mixer Guitar Center
Automotive Ceramic Coating Products & Applicators
Microfiber Applicator Pad
This microfiber sponge pad is an easy to use microfiber wax, coating, sealant, and dressing applicator. The inside sewn edges insure that only premium microfiber fabric is in contract with your paint. The rectangle cubic shape provides two 3.5”x5” (for a total of 35 square inches) surfaces for application. It fits right in the palm of your hand - is easy to hold and maneuver. The flat surface of the microfiber applicator block covers more area for faster application.
Microfiber Detailing Block Sponge Applicators | Autofiber, Black
Concrete Truck Parking Stop Blocks Nitterhouse Masonry
Viking Microfiber Applicator Pads, 6 pk
This premium applicator sponge is our go-to product for interior and exterior detailing that needs a precise and delicate approach. Spray or drip a product onto it and cover large swaths of exterior bodywork or get into small crevices in interior paneling. You'll use them so often, you'll wonder why you are always running out! Luckily, these applicator sponges can be used and washed hundreds of times, no matter what detailing soaps, cleaners, or sealants were used.
The Rag Company Terry Applicator Sponge, 3 x 5 / Black / 6 Pack
The main complaint about microfiber applicators is the that they absorb too much product. Over the past few years, as expensive coatings have taken over the industry, the complaint has only grown. Microfiber applicators make coating product application easier, quicker and more efficient, but coatings typically have a lower viscosity (not as thick - flow easier) so they soak through the microfiber to the sponge, wasting valuable product. Our solution to this problem is the [Saver Applicator].
Autofiber Saver Applicator Mini Green and Gray - 3x1.5x1.5
The main complaint about microfiber applicators is the that they absorb too much product. Over the past few years, as expensive coatings have taken over the industry, the complaint has only grown. Microfiber applicators make coating product application easier, quicker and more efficient, but coatings typically have a lower viscosity (not as thick - flow easier) so they soak through the microfiber to the sponge, wasting valuable product. Our solution to this problem is the [Saver Applicator].
Autofiber Saver Applicator Mini Green and Gray - 3x1.5x1.5
Fasmov Microfiber Applicator Pads Wax Applicator-20 Pack, Blue
