Juneteenth Puff HTV Heat Transfer Vinyl - Paint Pour

By A Mystery Man Writer

Description

lt;p>Sheet size is 12”x18”. This is a 2 step HTV. Carrier sheets to transfer design are included. Color lightens slightly after it puffs. </p><div>• Great For Applying to Cotton, Polyester, or Cotton/Poly Blend Materials</div><div>• Matte finish, great for both light and dark-colored fabrics</div><div>• Do Not Use with a Home Iron</div><div>• Cut With Any Vinyl Cutter - Silhouette Instructions: Blade 3, Speed 6, Force 6; Cricut Instructions: Everyday iron-on setting</div><div>• Cut Print Side Up (do not mirror), Weed, then apply transfer mask (included) to remove the design</div><p>• Cannot be used by overlapping layers with other HTV or DTF. If using other HTV, puff must be the final press</p><p>• Not suitable for fine details. </p><div><br></div><div><br></div><div>Pressing Instructions: </div><div>• Preheat: 2-3 Seconds</div><div>• Temperature: 285° -F-310 ° F</div><div>• Pressure: Medium • Time: 10-12 Seconds</div><p>• Peel: Hot/WARM</p><div>Try using it at a low temperature first, and if the puff doesn
Sheet size is 12”x18”. This is a 2 step HTV. Carrier sheets to transfer design are included. Color lightens slightly after it puffs. • Great For Applying to Cotton, Polyester, or Cotton/Poly Blend Materials • Matte finish, great for both light and dark-colored fabrics • Do Not Use with a Home Iron • Cut With Any Vinyl Cutter - Silhouette Instructions: Blade 3, Speed 6, Force 6; Cricut Instructions: Everyday iron-on setting • Cut Print Side Up (do not mirror), Weed, then apply transfer mask (included) to remove the design • Cannot be used by overlapping layers with other HTV or DTF. If using other HTV, puff must be the final press • Not suitable for fine details. Pressing Instructions: • Preheat: 2-3 Seconds • Temperature: 285° -F-310 ° F • Pressure: Medium • Time: 10-12 Seconds • Peel: Hot/WARM Try using it at a low temperature first, and if the puff doesn't work well, try heat-pressing it by raising it by 5 degrees. If the temperature is too high, unwanted wrinkles may occur, so we recommend a sample test with a small shape if possible. Some heat presses may be calibrated differently. We recommend performing a test cut and test press first. Message me with any questions or for further instructions. I am happy to help **Please note that, due to variations amongst computer monitors, actual colors may vary slightly from what appears on your screen.