Halder Supercraft 1 3/4 lb Dead Blow Mallet
By A Mystery Man Writer
Description
Soft Face hammers and replacement faces available in a wide range of sizes at The Hammer Source!
H3377.040Halder Supercraft Mallets, Made in Germany The housing is made from reinforced tubular steel and filled with steel shot for a satisfying non-rebound effect. Significant, double-weld over-strike protection at neck helps reduce handle breakage.Tubular steel handle with ergonomic rubber grip. Heads are lathed from extruded rods of nylon (Polyamide 6, Natural, 65 Shore D +/- 5) with a press fit design.Suggested uses: Automobile assembly and repair work, positioning of work pieces in the vice, tent and hall construction, car body work, repair and maintenance work, straightening work, housing assembly, assembly of sharp-edged work pieces, joining of work pieces, sheet-metal working. Face diameter: 40mm (1.57 inches), Head length 4 1/2 inches, Tool length 11 3/4 inches.Replacement tip is H3508.040
H3377.040Halder Supercraft Mallets, Made in Germany The housing is made from reinforced tubular steel and filled with steel shot for a satisfying non-rebound effect. Significant, double-weld over-strike protection at neck helps reduce handle breakage.Tubular steel handle with ergonomic rubber grip. Heads are lathed from extruded rods of nylon (Polyamide 6, Natural, 65 Shore D +/- 5) with a press fit design.Suggested uses: Automobile assembly and repair work, positioning of work pieces in the vice, tent and hall construction, car body work, repair and maintenance work, straightening work, housing assembly, assembly of sharp-edged work pieces, joining of work pieces, sheet-metal working. Face diameter: 40mm (1.57 inches), Head length 4 1/2 inches, Tool length 11 3/4 inches.Replacement tip is H3508.040
Manual Tools Hammers Halder Supercraft H 30 Reducing Handle Hammer Brown. The head pipe of the hammer is filled with steel shot. This means that when the impact surface hits the workpiece, the shot filling follows with a delay. Due to the reduced rebound, the impact energy is used optimally.Welded, handle protection sleeve, very secure handle-head connection by aluminium wedge and locking pin, resistant powder coating.
Halder 3366.030 Supercraft 15 oz Dead Blow Hammer, Hickory Handle
Halder Supercraft Dead Blow, Non-Rebounding Hammer with Nylon Face Inserts and S
Supercraft Dead Blow Non-Rebounding Hammer w/ Nylon Face Inserts and H — Atlas Preservation
Halder 1.0144-lb Smooth Face Plastic Head Wood Dead Blow Hammer in the Hammers department at
Halder 3508 white nylon face for Halder Supercraft Dead Blow mallets for the Halder H3366 wood handled dead blow hammers and Halder H3377 steel handled dead blow hammers. Also made to fit Halder Punches. White nylon hard face. Lathed from extruded rods of nylon (Polyamide 6, Natural, 65 Shore D +/- 5), non-marring, press fit design.
Halder Supercraft Dead Blow Hammer Replacement Face, Nylon, 1.18
新作・人気アイテム Dead Blow Hammer， 62 oz.， 12-3/4
Non-rebound, for extra powerful strikes. Noise-dampening and gentle on the joints. Inserts made of special nylon with maximum strength. Completely robot-welded. Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle. Handle protection sleeve acts as an overstrike protector. Handle and inserts replaceable. Available in sizes ranging from D20mm to D80mm and as a sledge hammer weighing up to 9,300g.
Supercraft Sledge Hammer
Halder 1.0144-lb Smooth Face Plastic Head Wood Dead Blow Hammer in the Hammers department at
Supercraft Halder 2.5 lb. Dead-Blow Hammer with Steel Handle Rubber Grip and Replaceable Nylon Face Inserts 3377.150 - The Home Depot
from
per adult (price varies by group size)
