Bison Epoxy Universal, Strong Dual-component Epoxy Adhesive, Transparent Epoxy Glue for All Materials and Surfaces, Water Resistant Material
By A Mystery Man Writer
Description
This Glue item by PolymerClayLatvia has 29 favorites from shoppers. Ships from Latvia. Listed on Nov 15, 2023
Bison Epoxy Universal Product information: * Super-strong (up to 170 kg/cm²) * Resistant to temperatures between -30°C and +80°C * Filling * Water resistant * Chemical resistant * Paintable Suitable for: Ideal for repairs to metal, ceramics, porcelain, crystal, glass, ivory, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass) GETTING STARTED Before Use: Working conditions: only apply at temperatures between +5°C and +35°C. Product cures by mixing the resin and hardener. Personal safety: preferably wear gloves. Surface requirements: the materials to be bonded must be dry, clean, free of dust and grease. Preliminary surface treatment: degrease parts to be bonded with acetone. Roughen smooth surfaces (sandpaper). Tools: mix the components in the double-syringe by means of the supplied mixing bowl and spatula. During Use: Handling of packaging: remove the spatula from the side of the double syringe, and the closure cap from the handle. Break the seal of the double syringe. Directions for use: Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a synthetic spatula until a mixture is obtained with a homogeneous colour. Apply the mixture, which at room temperature (+20°C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. After use, clean the nozzle with a cloth and place the special cap in the handle on the double syringe. Resin and hardener must not come into contact with each other unless for usage. Advice: Some types of synthetics can not be joined such as polyethylene and polypropylene. This can be tested by holding a glowing copper wire against the synthetics. Does it smell of wax? Then you can not bond it. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing. Points of attention After use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5°C. After Use: Stains/residue Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically. Storage conditions: Store cool, dry, frost-free, upright (nozzle upwards) and tightly closed.
Bison Epoxy Universal Product information: * Super-strong (up to 170 kg/cm²) * Resistant to temperatures between -30°C and +80°C * Filling * Water resistant * Chemical resistant * Paintable Suitable for: Ideal for repairs to metal, ceramics, porcelain, crystal, glass, ivory, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass) GETTING STARTED Before Use: Working conditions: only apply at temperatures between +5°C and +35°C. Product cures by mixing the resin and hardener. Personal safety: preferably wear gloves. Surface requirements: the materials to be bonded must be dry, clean, free of dust and grease. Preliminary surface treatment: degrease parts to be bonded with acetone. Roughen smooth surfaces (sandpaper). Tools: mix the components in the double-syringe by means of the supplied mixing bowl and spatula. During Use: Handling of packaging: remove the spatula from the side of the double syringe, and the closure cap from the handle. Break the seal of the double syringe. Directions for use: Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a synthetic spatula until a mixture is obtained with a homogeneous colour. Apply the mixture, which at room temperature (+20°C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. After use, clean the nozzle with a cloth and place the special cap in the handle on the double syringe. Resin and hardener must not come into contact with each other unless for usage. Advice: Some types of synthetics can not be joined such as polyethylene and polypropylene. This can be tested by holding a glowing copper wire against the synthetics. Does it smell of wax? Then you can not bond it. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing. Points of attention After use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5°C. After Use: Stains/residue Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically. Storage conditions: Store cool, dry, frost-free, upright (nozzle upwards) and tightly closed.
Bison Epoxy 2 Part Epoxy Waterproof Adhesive – Fox's Chandlery
Ceramic Kiln Glue, High Temperature Resistant Material, Fireproof Mud, Solid Binder, Refractory Brick Board Bonding Adhesives, Crafting Clay - Denmark
Bison Epoxy Universal, Strong Dual-component Epoxy Adhesive, Transparent Epoxy Glue for All Materials and Surfaces, Water Resistant Material
Moment époxy Glue
Epoxy Glue - UK
Foil Adhesive Transparent, Bottle 51g Mirror Foil Craft Decorate - Ireland
BISON EPOXY Crystal Clear 5 Minutes Fast Two-Component Epoxy Glue Adhesive: : Industrial & Scientific
BISON EPOXY Crystal Clear 5 Minutes Fast Two-Component Epoxy Glue Adhesive: : Industrial & Scientific
Liquid Glass Epoxy - UK
Shoemaking Glue & Adhesives
Bison Montage kit Cotact Adhesive Universal Adhesive Plastic Adhesive EPOXY Glue
Bison Epoxy 5 Minutes TDS, PDF, Epoxy
Polymer Clay Bison
Bison Resin
from
per adult (price varies by group size)
