AMACO Slab Rollers - Brent SR-36 Slab Roller

By A Mystery Man Writer

Description

Use this large clay slab roller for large clay slabs to create a thinner, flatter slab for creative use.
Large pottery projects require a way to take large slab of clay and turn it into a flat piece that can be used for any creative project or projects. If you have a lot of clay and need it to be rolled into a consistent thickness, there is this slab roller. Get a full $100 worth of glazes from Amaco with this purchase. This roller is a large model that will produce a slab of clay that is 36 wide and 52 long. The maximum thickness of the resulting slab is 7/8 . This large roller is just right for thick slabs of clay, but it may not produce a uniform thickness on smaller slabs that are 1/2 thick to 3/8 thick. The slab that is created may be slightly thinner on the edges than in the middle. With thicker clay slabs this difference will not be as evident as with smaller ones. The dimensions of this unit after assembled is 49 wide, 40 high and 76 long.

AMACO Slab Rollers - Brent SR-36 Slab Roller

Clamp Kee 10-76 : Slab Roller Parts : Brent

Replacement cables for SRC Brent Slab Rollers.

Cables SRC (Set of 4)

Made from heavy-gauge steel pipe, precision machined parts, permanently sealed bearings and aircraft quality cables. Rolls slabs 14 wide by 36 long and up to 1-3/4 thick. Add or remove shims to vary thickness of the slab.

Brent Slab Roller SR 14 with Leg Assembly

Make a wide variety of extruded shapes with either your Brent Clay Extruder or your Brent Clay Extruder HD. Set includes 3 metal circle dies and makes 3/16 to 5/8 diameter rods, tubes and ribbons.