6 Straight Line Stencil — 1-800-Stencil

39 Handicap Stencil SKU: 0300-039

The 39 inch Handicap Stencil is a large handicap stencil that meets ADA (Americans with Disabilities Act) standards and some state/ local standards. This 39 Handicap Stencil is good for large handicap marking areas when it meets the state and local standards. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

Specifications

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4300-039 5300-039 6300-039 7300-039

Selecting a Stencil Grade:

• 1/8 (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
• 1/16 (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8 counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
• 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
• 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.

12 Alphabet Kit Stencil SKU: 0370-012/0371-012

This 12 inch Tall Alphabet stencil kit is a must have for any striping contractor, it is handy for any time that you pull up to a job site and realize that you left your 12 NO PARKING stencil at the last job This kit is also ideal for marking warehouse aisles, Lettering parking stalls or just painting obscure words that it just isn't feasible to get a full stencil made for. Our 12 wording stencils are cut on a 16 tall piece of plastic and have 1 spacing on each side. This is a design feature so that you can butt each stencil to the other and create perfect 2 spacing. The 38 piece kit has an extra A, C, E, I, N, O, R, S to make it easier to paint common wording that goes in a parking lot. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

Specifications

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4370-012 5370-012 6370-012 7371-012

4371-012 5371-012 6371-012 7370-012

Selecting a Stencil Grade:

• 1/8 (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
• 1/16 (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8 counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
• 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
• 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.

6 Straight Line Stencil SKU: 1800-6497

This 6 inch Straight Line stencil is perfect for marking fields or pavement. It leaves behind clean crisp lines that will be easily seen by your athletes. The 3 inch overspray ensures that the paint will only end up where it needs to be to give you the sharpest lines possible. The material we use at 1-800 Stencil is long lasting and durable. It will be able to last many jobs and is easy to use and clean up. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

Specifications

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

116-6497 108-6497 080-6497 025-6497

Selecting a Stencil Grade:

• 1/8 (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
• 1/16 (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8 counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
• 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
• 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.